Lighting Categories

Wednesday, January 22, 2020

Philips Obstruction Light (Lampu Tower/Lampu Obstivision/Lampu Menara)

Lampu Obstruction/Obstivision PHILIPS OBL XGP500


ObstiVision LED obstacle light − the promise of a safe journey ObstiVision XGP500

The ObstiVision LED is a dedicated maintenance-free obstacle light for aviation warning purposes and features LUXEON® K2 LEDs. Its advanced high-power LED with optimized optical design is able to create a reliable system based on only one single LED. It is suitable to be used as a Low Intensity, Type A obstacle light according to ICAO standards. The key applications are telecom towers, buildings, power transmission towers, airports and general aviation warning purposes. The efficiency, reliability and freedom from maintenance mean that ObstiVision will save you money over time! Considering the cost of ownership, you can have your payback period as short as one year by using ObstiVision as compared to the conventional obstruction lighting system.

Benefits • No lamp replacement and free from maintenance during lifetime • Increased safety thanks to low failure LED technology • Energy saving compare to incandescent lighting technology Features • Using LED chip as light source • Life time 50,000 hours (70% lumen maintenance) • Exceptional energy efficiency • Plug and play, operates under multiple power inputs • Water and dust protection reaches IP66, vibration proof

Application • High buildings • Towers • Airports • General aviation warning purposes Specifications • Type XGP500 • Light source Luxeon® K2 LED, with superior packaging and low thermal resistance • Light color Red • Light intensity (ICAO) > 15 cd • Power supply 100-240 V AC / 50-60 Hz 24-48 V DC • Power consumption Max 5 W • Materials and finishing Housing: high-pressure, die-cast aluminum Cover: glass, UV-protected clear, 5 mm thick Stainless steel plate to support LED unit • Color Yellow, powder painted • Installation Pipe installation: the standard luminaire comes with threaded base (G1") Terminal block for 2 x (0 to 2.5 mm2 ) cables Operating temperature: -40ºC < Ta  < 70ºC Drag factor (Cx): 1.2 Max SCx value by side: 0.0202 m2 • Lifetime 50,000 hours (70% lumen maintenance) • Remarks Complies with International Civil Aviation Organization (ICAO) standards and recommended practices– Aerodromes Annex 14 Volume 1, 3rd edition – July 1999, Chapter 6 Wind load at 200 km/h or less than 40 N Weight: 1.35 kg




Lampu Obstruction/Obstivision PHILIPS OBL XGP388



ObstiVision LED obstacle light − the promise of a safe journey ObstiVision XGP338

A dedicated maintenance-free
obstacle light for aviation warning
purposes. Light emitting diode
(LED) technology is chosen to be
the light source of this product.
ObstiVision is suitable to be used
as a Low Intensity,Type A
obstacle light according to ICAO
standards.Type B obstacle light
with higher intensity is also
available upon request.
Product Compliance
International Civil Aviation
Organization (ICAO) standards
and recommended practices -
Aerodromes Annex 14 Volume 1,
3rd edition, July 1999, Chapter 6
Federal Aviation Administration
(FAA) standard
Main application
Airfields
Telecommunication towers
Tall buildings
Power transmission towers
Features
• Extremely long lamp life of
100,000 hours
• Energy savings of up to 95%
• Quick pay-back period of 1
year or less
Technical descriptions
Mechanical
•Yellow powder painted highpressure
die-cast aluminium
housing
• Clear glass cover – 5mm thick
• Stainless steel plate to support
LED unit
•Operating temperature =
-40°C to +70°C
• IP65
• Wind load at 200 km/hr of less
than 40 Newton force
• Threaded base for 1 inch in
diameter size of pipe (other size
can be applied with the reducer
or enlarger)

Electrical
• Standard type using nominal
operating voltage of 48Vdc or
220-240Vac; 12 Vdc and 24 Vdc
systems are available upon
request
•Terminal block for 2 x 1.5mm2
cables
• Power consumption: 5W for
48Vdc version and 7W for 220
240Vac version
• Constant current 100mA
• Surge protection device
integrated: according to Institute
of Electrical and Electronics
Engineers (IEEE) requirement
Optical
• Luminous intensity of greater
than 10 cd for low intensity
type A obstacle light (low
intensity type B obstacle light is
available upon request and has
luminous intensity of greater
than 32 cd)
•Horizontal radiation coverage
360°
• Vertical radiation coverage 50°
• Color: aviation red, choice of
fixed or flashed light
Installation and mounting
• Pipe installation: the standard
luminaire comes with threaded
base – ready to be installed
with threaded pipe of 1 inch in
diameter (other size of pipe –
use standard reducer or
enlarger)
•To attach ObstiVision with
existing attenna / pipe or wall
mounted installation, the
mounting kit is required.
Accessories
• Control box
• Photo switch and sensor
• Mounting accessories (please
check with your local Philips
agent)
• 3-way and 4-way junction box
for through-wiring
• Solar cell

Type Description Ordering Number
XGP388 48Vdc A ObstiVision 48Vdc 9199 186 76132
XGP388 48Vdc AF ObstiVision 48Vdc with flasher 9199 186 76032
XGP388 220-240Vac A ObstiVision 220-240Vac 9199 186 77132
XGP388 220-240Vac AF ObstiVision 220-240Vac with flasher 9199 186 77032
ZGB388 48Vdc T Control box 48Vdc with timer 9199 186 72032
ZGB388 48Vdc P Control box 48Vdc with photo switch 9199 186 72132
ZGB388 220-240Vac T Control box 220-240Vac with timer 9199 186 72232
ZGB388 220-240Vac P Control box 220-240Vac with photo switch 9199 186 72332
ZGP388 TW3 3-way throughwiring junction box 9199 186 71032
ZGP388 TW4 4-way throughwiring junction box 9199 186 71132
ZPP388 Mounting Kit - pipe installation 9199 186 70032
ZVB388 Mounting Kit - building top installation 9199 186 70132
ZWB388 Mounting Kit - wall mounted installation 9199 186 70232
Standard execution in 220 volts, 50 Hz.


If you need enquiry, product consultation, please contact us :

PT. SAVONT VARAVI INDONESIA
DISTRIBUTOR RESMI LAMPU PHILIPS

Ruko Serua Indah Residence, Jln. Serua Raya no. 6-7 Reni Jaya - Bojongsari - Depok , Jawa Barat 16517
 Telp : 021- 7419460/021-7494545 Fax : 021- 7419460
Contact Person : Tommy Bhong / Ririn / Sevi
Simpati : 08.11111.0694 / 08.11111.8321 / 0811.989.202
Indosat :  0815.160.6771
XL : 0859.3976.3399
3 : 08.9999.222.44
Whatsapp : 08.11111.0694 / 08.11111.8321
Email :
sales_support@savontindonesia.com
customer.service@savontindonesia.com
Website :

“ Your Partner to Total Lighting & Electrical Equipment Solution”